Home » Products » EHI2 – Dual Flow Seal Water Meter

EHI2 FLOW METER

LARGE FLOWS AND DEMANDING APPLICATIONS

APPLICATIONS

  • Sealing and cooling water measurement
  • Lubrication oil measurement
  • Mixing of gases

FEATURES

  • Solid construction for reliable operation
  • Built in flow control valve
  • Large selection of flow ranges and materials
  • Easy to install, clean and maintain
  • Impact resistant flow tube
  • Alarm ready

OPTIONS

  • Adjustable alarm sensor
  • Pressure gauge (with optional red set pointer)
  • Special materials for high temperatures and corrosive chemicals

IDEAL FOR

Flows up to 30 GPM (120 liters/minute)  

SUBSTITUTE SS316 END BLOCKS

For demanding applications

DUAL FLOW DESIGN

Model EHI2 has many of the same features as the model EHI but the dual flow configuration allows for monitoring of both the flow into the seal and the return (drain) flow out of the seal. Monitoring both flows gives an indication of how much water may be entering the process. In paper processing, minimizing excess water flow can result in significant cost savings and process efficiencies. Available with SS316 end blocks for maximum strength in demanding applications, this model is ideal for higher flows, up to 30 gallons per minute. Built with industrial strength components these flow meters are well suited for installation in challenging operating environments.

TECHNICAL SPECIFICATIONS


MODELEHI2-DEHI2-KEHI2-S
BODY MATERIALDELRIN® (POM)KYNAR® (PVDF)SS316
Metering tubeGrilamid® TR55 or Polysulphone (PSU)Grilamid® TR55 or Polysulphone (PSU)Grilamid® TR55 or Polysulphone (PSU)
Side plateSS316SS316SS316
O-ring sealsNitrile (optional Viton® or EPDM)Nitrile (optional Viton® or EPDM)Nitrile (optional Viton® or EPDM)
Maximum pressure290 psi290 psi440 psi
Maximum temperature176°F / 80°C (with Grilamid® flow tube) 248°F / 120°C (with PSU flow tube)176°F / 80°C (with Grilamid® flow tube) 248°F / 120°C (with PSU flow tube)176°F / 80°C (with Grilamid® flow tube) 248°F / 120°C (with PSU flow tube)
Connections1″ NPT1″ NPT1″ NPT
Weight3.1 lb (1.4 kg)3.1 lb (1.4 kg)4.2 lb (1.9 kg)

BUILD OPTIONS: Body material, metering tube, O-ring seals, calibration for non-standard liquids and gases.

OPTIONAL ACCESSORIES: Inductive adjustable alarm, pressure gauge (with optional red set pointer).

OPTIONS AND ADD-ONS

Body Materials

  • Delrin® (POM)
  • Kynar® (PVDF)
  • SS316

Metering Tube

  • Grilamid® TR55
  • Polysulphone (PSU)

Pressure Gauge

  • optional red set pointer

Alarm Sensor

  • Inductive adjustable alarm

ORDER GUIDE